Reference

Tools

Every tool in Graphics Editor: where to find it on the tools bar or in the Tools menu, its key, and what it does with Shift, Alt and Ctrl.

Finding a tool

The tools bar runs down the left side of the window. Click a tool to use it, or press its key. Point at a tool to see its name and key.

Most buttons also hold a flyout of related tools. To open it, press and hold the button, right-click it, or click the small arrow in its bottom-right corner. While a tool from a flyout is active, its group's button is highlighted.

Every tool is also in the Tools menu, either directly or in one of its submenus: Shape Tools, Path Editing Tools and Transform & Construction Tools. You can change any tool's key in Tools > Keyboard Shortcuts… (see Keyboard shortcuts).

The tables below follow the order of the tools bar. The Where column names the tools bar button (or the flyout it sits in) and the Tools menu entry.

Selection tools

Tool Key Where What it does
Selection Tool V Tools bar; Tools > Selection Tool Click an object to select it, drag it to move it, drag on empty canvas to select with a marquee. Shift-click adds or removes objects; Alt-drag on empty canvas draws a freehand lasso. Drag a handle to scale (Shift keeps proportions, Alt scales from the centre) or the handle above the box to rotate (Shift snaps to 15° steps). Locked objects act like empty canvas
Free Transform Tool E Selection Tool flyout; Tools > Transform & Construction Tools Drag a corner handle to scale (Shift keeps proportions, Alt scales from the centre); drag just outside a corner to rotate (Shift snaps to 15°); hold Ctrl and drag an edge's middle handle to shear (Alt shears about the centre, Shift snaps to 15°). Escape cancels the drag
Direct Selection Tool A Tools bar; Tools > Direct Selection Tool Click a path to show its anchor points, then drag an anchor or a handle to reshape the path. Shift constrains the drag to 45° steps
Live Corners Direct Selection Tool flyout; Tools > Live Corners Select a rectangle and drag a corner's round handle to round that corner. Shift-drag rounds all four corners together, Alt-drag rounds the opposite corners together. The radius stops at half the shorter side
Smooth Slider Direct Selection Tool flyout; Tools > Smooth Slider Select a path and drag the slider that appears on the canvas to simplify the path, with the anchor count shown as you go. Click Apply or press Enter to keep the result, Cancel or Escape to go back

Pen and path tools

Tool Key Where What it does
Pen Tool P Tools bar; Tools > Pen Tool Click to add corner points, drag to add smooth points with handles. Click the first point to close the path; press Escape to finish an open path. When you are not drawing, pointing at a path segment lets you add an anchor there and pointing at an anchor lets you remove it
Curvature Pen Tool Pen Tool flyout; Tools > Path Editing Tools Click to place anchors; the curve through them is smoothed automatically and previewed up to the pointer. Click the first point to close the path; Escape finishes an open path
Add Anchor Point Tool + Pen Tool flyout; Tools > Path Editing Tools Click a path segment to add an anchor point there without changing the shape
Delete Anchor Point Tool - Pen Tool flyout; Tools > Path Editing Tools Click an anchor point to remove it. If a path has too few points left, it is removed
Convert Anchor Point Shift+C Tools bar and Pen Tool flyout; Tools > Convert Anchor Point Click an anchor of a selected path to switch it between smooth and corner; drag from an anchor to pull out new handles
Pencil Tool N Tools bar; Tools > Pencil Tool Drag to draw freehand; the line is simplified and smoothed into curves when you release. Start drawing at the end of an existing path to extend that path

Shape tools

Shapes are drawn into the current layer and snap to the grid, guides and other objects when snapping is on. The outline of the shape is previewed while you drag.

Tool Key Where What it does
Rectangle Tool M Tools bar; Tools > Rectangle Tool Drag to draw a rectangle. Shift makes a square, Alt draws from the centre
Polygon Tool Rectangle Tool flyout; Tools > Shape Tools Drag to draw a six-sided polygon that fits the dragged box. Alt draws from the centre. Change the number of sides afterwards in the Properties panel
Star Tool Rectangle Tool flyout; Tools > Shape Tools Drag to draw a five-pointed star that fits the dragged box. Alt draws from the centre. Change the points and inner radius afterwards in the Properties panel
Flare Tool J Rectangle Tool flyout; Tools > Flare Tool Click to place a lens flare (a centre glow, rays and rings); drag to set its size
Ellipse Tool L Tools bar; Tools > Ellipse Tool Drag to draw an ellipse. Shift makes a circle, Alt draws from the centre
Line Tool \ Tools bar; Tools > Line Tool Drag to draw a straight line. Shift constrains it to 45° steps, Alt draws it out from the start point in both directions
Arc Tool Line Tool flyout; Tools > Shape Tools Drag to draw a half-ellipse arc that fits the dragged box. Shift keeps it circular, Alt draws from the centre
Spiral Tool Line Tool flyout; Tools > Shape Tools Press at the centre and drag outwards: the drag sets the spiral's size and the angle it starts at

Type tools

Tool Key Where What it does
Text Tool T Tools bar; Tools > Text Tool Click to place a line of text and type it straight away on the canvas. To change an existing text object, select it and press Enter while this tool is active
Touch Type Tool Shift+T Tools bar; Tools > Touch Type Tool Select a text object, click a character and drag to move just that character. Shift-drag rotates it, Ctrl-drag scales it, the arrow keys nudge it, and Delete puts it back as it was

Brushes and erasing

Tool Key Where What it does
Brush Tool B Tools bar; Tools > Brush Tool Drag to paint a brush stroke whose width follows your speed: the faster you draw, the thinner the stroke
Scatter Brush Tool Brush Tool flyout; Tools > Path Editing Tools Drag to scatter small shapes along the line you draw
Blob Brush Shift+B Tools bar; Tools > Blob Brush Drag to paint a stroke that becomes a filled shape
Eraser Tool Shift+E Blob Brush flyout; Tools > Path Editing Tools Drag over shapes to erase the parts under the eraser. With a selection, only the selected objects are erased; locked and hidden objects are never touched

Colour and construction tools

Tool Key Where What it does
Eyedropper Tool I Tools bar; Tools > Eyedropper Tool Click an object to pick up its fill colour and give it to the selected objects' fill. Shift-click gives it to their stroke instead. The colour also shows in the Color panel
Measure Tool Eyedropper Tool flyout; Tools > Transform & Construction Tools Drag between two points to see the distance, the angle and the horizontal and vertical distances. Shift constrains the line to 45° steps. Nothing is added to the document
Gradient Tool G Tools bar; Tools > Gradient Tool Drag across a selected object to give it a linear gradient fill; Alt-drag makes a radial gradient. On an object that already has a gradient, drag the end points or the colour stops to edit it, and press Delete to remove the selected stop (a gradient keeps at least two)
Live Paint K Gradient Tool flyout; Tools > Live Paint Click an area where shapes overlap to fill just that area with the Color panel's fill colour. It works on the selected shapes, or on the shapes under the pointer when nothing is selected
Shape Builder Tool Shift+M Gradient Tool flyout; Tools > Path Editing Tools Select overlapping shapes, then drag across the areas you want to join into one shape. Alt-drag removes the areas instead
Blend Tool W Gradient Tool flyout; Tools > Transform & Construction Tools Click one shape, then another, to create a group of in-between steps (as many as Object > Blend > Blend Options… sets) that change shape and colour from the first to the second. Escape starts again

Reshaping tools

Tool Key Where What it does
Warp Tool Shift+R Tools bar; Tools > Warp Tool Drag over selected paths to push their points along with the pointer, like a finger in wet paint
Width Tool Shift+W Warp Tool flyout; Tools > Path Editing Tools Drag outwards from the stroke of a selected path to make it wider at that point, on both sides. Alt-drag widens only the side you drag towards. Drag an existing width point to change it; Delete removes it
Puppet Warp Tool Warp Tool flyout; Tools > Transform & Construction Tools Select a path and click to add pins. Drag a pin to bend the shape around the other pins. Delete removes the last pin you added; Escape cancels a drag
Envelope Mesh Tool Warp Tool flyout; Tools > Path Editing Tools Drag the points of an envelope mesh made with Object > Envelope Distort > Make with Mesh to distort the artwork inside it

Cutting tools

Tool Key Where What it does
Scissors Tool C Tools bar; Tools > Scissors Tool Click a path segment to cut the path at that point
Knife Tool Scissors Tool flyout; Tools > Path Editing Tools Drag a freehand line across shapes to cut them into separate pieces. With a selection, only the selected objects are cut; locked and hidden objects are never touched

Artboard and web tools

Tool Key Where What it does
Artboard Tool Shift+O Tools bar; Tools > Artboard Tool Drag to create a new artboard; click an existing artboard to select it
Slice Tool Artboard Tool flyout; Tools > Slice Tool Drag to mark a rectangular area as a slice for File > Export Web Slices…
Perspective Grid Tool Shift+P Artboard Tool flyout; Tools > Transform & Construction Tools Shows a perspective grid while the tool is active. Drag the vanishing points to adjust it; press 1, 2 or 3 for one-, two- or three-point perspective
Tool Key Where What it does
Hand Tool H Tools bar; Tools > Hand Tool Drag to move the view
Zoom Tool Z Tools bar; Tools > Zoom Tool Click to zoom in, Alt-click to zoom out, or drag a box to zoom to that area

Tip: With any tool, hold Space and drag, or drag with the middle mouse button, to move the view. Hold Ctrl and turn the mouse wheel to zoom around the pointer; the wheel alone scrolls up and down, and Shift with the wheel scrolls sideways.