Chapter 2
Documents and artboards
Create, set up, open, place, save and organise documents: artboards, layers, file versions and working with several documents in tabs.
Creating a document
Choose File > New (Ctrl+N) to open the New Document dialog. Each new document opens in its own tab.
Note: Creating and saving documents needs a Motaware plan that includes the desktop apps, or a permanent license. Without one, the editor is read-only. See Getting started.
Profiles
The Profile list fills in the width and height for common formats. Pick one, then change anything you like. If you type your own width or height, the profile switches back to Custom.
| Profile | Size |
|---|---|
| Letter | 8.5 x 11 in |
| A4 | 210 x 297 mm |
| A3 | 297 x 420 mm |
| Web | 1920 x 1080 |
| Mobile | 375 x 812 |
| Tablet | 768 x 1024 |
| Social Media | 1080 x 1080 |
| Business Card | 3.5 x 2 in |
| Poster | 18 x 24 in |
The other settings
- Name is the name the tab shows until you save. Every new document starts as "Untitled".
- Width and Height use the unit set in Edit > Preferences… > Units.
- Orientation swaps the width and height between Portrait and Landscape.
- Artboards sets how many artboards to start with, from 1 to 100. They all get the same size and sit side by side in a row, 40 points apart. Each one starts with a layer called "Layer 1".
- Color Mode (RGB or CMYK) and Raster Effects (72 to 2400 dpi, 300 by default) are stored with the document.
The dialog remembers your last size, artboard count, colour mode and resolution for next time.
Document Setup
Choose File > Document Setup… to change an open document.
- Name, Width and Height change the document itself.
- Resize artboards to match gives every artboard the new size. It is ticked for you when the document has a single artboard. Leave it clear to keep each artboard's own size.
- The Bleed group sets a bleed for the Top, Bottom, Left and Right edges. The PDF/X exports use these four values for the bleed around each page. See Output.
All the changes you make in one visit to the dialog are a single undo step.
Artboards
An artboard is a page inside your document. A document can hold many artboards of different sizes, for example the pages of a brochure or the screens of an app. Each artboard holds its own layers and artwork. Printing gives one page per artboard, and File > Export Artboards… saves each artboard as its own file.
To see every artboard at once, choose View > Fit All Artboards.
The Artboard tool
Choose the Artboard tool (Shift+O, or Tools > Artboard Tool).
- Drag on the canvas to draw a new artboard. Its size is shown as you drag. The new artboard is named "Artboard" with the next free number and has its own "Layer 1".
- Click inside an existing artboard to select it.
The Artboards panel
Open the panel with View > Artboards. It lists every artboard with its size. Click an artboard in the list to edit it:
- Name renames the artboard.
- Width and Height resize it.
- Preset applies a ready-made size. The presets are grouped as Mobile, Print, Web, Film, Social and Icon.
- Add creates a new 800 x 600 artboard to the right of the others, with its own "Layer 1".
- Duplicate copies the artboard together with all its artwork and places the copy to the right of the others.
- Delete removes the artboard and everything on it. A document always keeps at least one artboard.
Every change in the panel can be undone.
Tip: To change the order of your artboards, drag their rows in the Layers panel. Printing follows this order.
Layers
Layers keep your artwork organised. Each artboard has its own layers, and everything you draw goes into a layer. Objects on a layer higher in the list are drawn in front of objects on the layers below it.
Open the panel with View > Layers Panel. It shows the whole document as a tree: artboards, their layers, and the objects and groups inside them.
Working with the Layers panel
- Click a row to select that layer or object. Ctrl-click and Shift-click select several rows.
- What you draw goes into a layer of the artboard you draw it on: the selected layer, or the selected object's layer, when it is on that artboard; otherwise that artboard's first layer you can edit. New artwork never goes into a locked or hidden layer.
- Double-click a name to rename it.
- Click + to add a new layer to the current artboard.
- Click - to delete the selected rows.
Visibility and lock columns
Each row has an eye column and a padlock column. Click the eye to hide or show the item. Click the padlock to lock or unlock it. Hiding or locking a layer affects everything on it.
Locked and hidden objects can't be selected on the canvas. To bring them all back, use Object > Unlock All (Ctrl+Alt+2) or Object > Show All (Ctrl+Alt+3).
The context menu
Right-click a row for Duplicate, Delete, Hide or Show, and Lock or Unlock. If you right-click a row that is part of a multiple selection, the command acts on every selected row.
Sublayers and moving objects
Drag rows to reorganise the document:
- Drag an object onto another layer to move it there.
- Drag a layer onto another layer to make it a sublayer.
- Drag rows up or down to change the stacking order.
Objects can go into layers and groups. Layers can go into artboards or into other layers.
Merging layers
Select two or more layers in the Layers panel and choose Object > Layer Operations > Merge Layers. Everything moves into the first of the selected layers, and the other layers are removed.
Isolation mode
Isolation mode lets you work on one layer without touching the rest. Select a layer in the Layers panel and choose Object > Layer Operations > Enter Isolation Mode. Every other layer is dimmed and locked. Choose Object > Layer Operations > Exit Isolation Mode to return to normal.
The dimming is only for your screen: files you save, export or print show every layer as it really is.
Template layers
A template layer is useful for tracing over a sketch or a photo. Select a layer and choose Object > Layer Operations > Toggle Template Layer. The layer is shown at 50% opacity and locked. Choose the command again to turn it back into a normal layer with its previous opacity and lock.
Opening files
Choose File > Open… (Ctrl+O). Graphics Editor opens:
- its own documents,
.mgfx, and older documents saved as.mota; - SVG, Adobe Illustrator (
.ai), EPS, PDF and Photoshop (.psd) files.
Each file opens in a new tab. If the file is already open, its tab comes to the front.
A file in another format opens as a new, unsaved document named after the file. When you save it, you are asked for a new .mgfx file name, so the original file is never overwritten.
Illustrator files must have been saved by Illustrator CS6 or later.
File > Open Recent lists the files you opened most recently. Clear Recent Files empties the list.
Placing and importing
Placing adds a file's artwork to the document you are working on, instead of opening it in a new tab.
Choose File > Import SVG… (Ctrl+Shift+I), Import AI…, Import EPS…, Import PSD… or Import PDF…. The artwork arrives as one group, named after the file and centred in the area you are looking at. It goes into the layer of the current selection, or the first layer you can edit. You can undo the import in one step.
Placing images
Choose File > Place Image… (Ctrl+Shift+K) to add a PNG, JPEG, BMP, GIF, TIFF or WebP image. You are asked how to place it:
- Link keeps the image in its own file. The document stays small and shows the file as it is on disk. Keep the image file with the document.
- Embed copies the pixels into the document, so the image travels with it.
The image is centred in the area you are looking at.
Saving
- File > Save (Ctrl+S) saves the document. A document that has never been saved asks for a file name.
- File > Save As… (Ctrl+Shift+S) saves under a new name. The tab then shows the new file.
- File > Save a Copy… saves a copy and leaves you working on the current file.
- File > Revert throws away your unsaved changes and reloads the last saved version, after asking you to confirm.
Documents are always saved in the Graphics Editor format, .mgfx. To write SVG, PDF, PNG or other formats, use the export commands. See Output.
Saving is safe: the new file is written in full before it replaces the old one. If something goes wrong while saving, the old file is still there.
A tab with unsaved changes shows * after its name. When you close a document with unsaved changes, you can Save, Discard or Cancel.
Opening files in other versions
| Saved with | Can be opened by |
|---|---|
| 1.4.0 or later | 1.4.0 and later |
| 1.2.0 to 1.3.3 | 1.2.0 and later |
| 1.1.x | 1.1.0 and later |
| 1.0.x | every version |
Every version opens the files saved by older versions. An older version can't open a file saved by a newer one, so update Graphics Editor on every computer you share files with. From 1.3.2 on, Graphics Editor tells you when a file was made by a newer version and points you to Help > Check for Updates….
When 1.4.0 or later opens a file from an earlier version, it converts the text sizes so the document looks the same: earlier versions drew text a third larger than the size they showed, so a text that read 24 pt now reads 32 pt, its real size, with its line spacing adjusted to match.
Auto Save
Auto Save keeps recovery copies of your work. Turn it on in Edit > Preferences… > General with Enable Auto Save, and set the Auto Save Interval (1 to 60 minutes, 5 by default). It is off until you turn it on.
At each interval, every document with unsaved changes is written to a Recovery folder as name.autosave.mgfx. The folder is %LOCALAPPDATA%\Motaware\Motaware Graphics Editor\Recovery. Your own files are only written when you save. To use a recovery copy, open it with File > Open… and save it under a new name.
Working with several documents
Each open document has its own tab above the canvas, with its own undo history, selection, zoom and guides.
- Click a tab to switch to it, or drag tabs to reorder them.
- Window > Next Document (Ctrl+Tab) and Window > Previous Document (Ctrl+Shift+Tab) move between tabs. The bottom of the Window menu lists every open document.
- File > Close (Ctrl+W) or the tab's close button closes a document. Closing the last tab leaves you with a new, empty document.
The grid and rulers settings apply to every tab.