Chapter 3

Selecting and arranging

Select objects, then move, scale, rotate, align, group, stack, copy and paste them, and place them exactly with snapping, the grid and guides.

Selecting objects

The Selection tool

Choose the Selection tool (V). It selects whole objects.

To Do this
Select an object Click it
Add or remove an object Shift-click it
Select objects in an area Drag a rectangle on empty canvas. Objects that lie completely inside it are selected
Select with a freehand shape Hold Alt and drag on empty canvas. Objects whose centre lies inside the shape are selected
Add to the selection with an area Hold Shift while you drag the rectangle or the freehand shape
Clear the selection Click empty canvas, or choose Select > Deselect (Ctrl+Shift+A)

A click selects the object under the pointer, even when it is part of a group. To select a whole group, drag a rectangle around it or click the group in the Layers panel.

Locked and hidden objects can't be selected on the canvas: the Selection tool treats them like empty canvas, and rectangles and freehand shapes pass over them. To work on them again, see Locking and hiding.

Right-click the canvas for a menu with the most common commands: undo, clipboard, group, arrange, transform, lock and hide.

Moving, scaling and rotating with the mouse

With the Selection tool:

  • Drag a selected object to move the selection.
  • Drag one of the eight square handles around the selection to scale it. The opposite side stays where it is.
  • Drag the round handle above the selection to rotate it around its centre.
Key While scaling While rotating
Shift Keeps the proportions Turns in steps of 15°
Alt Scales from the centre

Each move, scale or rotation is one undo step.

Nudging with the arrow keys

Press an arrow key to move the selected objects by 1 point, or Shift+arrow to move them by 10 points. Each key press is one undo step; holding a key down makes one step for the whole move. Locked and hidden objects stay where they are.

The Direct Selection tool

The Direct Selection tool (A) edits the points of a path.

  1. Click a path. Its anchor points and handles appear.
  2. Drag an anchor point to move it. Its handles move with it.
  3. Drag a handle to change the curve. On a smooth point, the opposite handle turns with it.

Hold Shift while you drag to keep the movement horizontal, vertical or at 45°.

The Select menu

  • Select > Select All (Ctrl+A) selects every object on every layer, skipping locked and hidden objects. Groups are selected whole.
  • Select > Deselect (Ctrl+Shift+A) clears the selection.
  • Select > Inverse selects everything that is not selected now, and deselects the rest.
  • Select > Same selects every object that matches the selected object: Select Same Fill Color, Select Same Stroke Color, Select Same Stroke Weight, Select Same Opacity or Select Same Blending Mode.

Transforming objects

The Transform panel

The Transform panel (View > Transform Panel) shows the selection's position and size:

  • X and Y are the top-left corner of the selection.
  • W and H are its width and height. Changing them scales the selection from its top-left corner.
  • R is the rotation. With several objects selected, it turns them together around the centre of the selection.

Type a value or use the arrows. Each edit can be undone.

Transform dialogs

The Object > Transform menu has dialogs for exact changes. They act on the whole selection, around the centre of the selection.

Command What you set
Move… (Ctrl+Shift+M) Horizontal and Vertical distance
Rotate… Angle. Positive angles turn counter-clockwise
Scale… Uniform with one Scale percentage, or separate Horizontal and Vertical percentages
Shear Horizontal… and Shear Vertical… Factor, from -10 to 10
Transform Each… (Ctrl+Shift+Alt+D) Scale, move and rotate values, Reflect X, Reflect Y and Random

Every dialog has two options:

  • Copy transforms a copy and leaves the original where it is.
  • Preview shows the result on the canvas while you change the values. Cancel removes it.

Transform Each transforms each object around its own centre instead of the centre of the selection. Reflect X flips each object top to bottom, Reflect Y flips it left to right. Random gives each object a random amount, up to the values you set.

The dialogs remember your last values. Move uses the unit set in Edit > Preferences… > Units.

Reflecting

Object > Transform > Reflect Horizontal flips the selection top to bottom. Object > Transform > Reflect Vertical flips it left to right. Both flip around the centre of the selection.

Transform Again

Object > Transform > Transform Again (Ctrl+D) repeats the last Move, Rotate, Scale, Shear, Reflect or Transform Each on the current selection, with the same values. If that transformation made a copy, Transform Again makes a copy too.

Tip: To make a row of evenly spaced copies, use Move… with Copy ticked, then press Ctrl+D as many times as you need.

The Free Transform tool

The Free Transform tool (E, or Tools > Transform & Construction Tools > Free Transform Tool) combines scaling, rotating and shearing in one tool:

  • Drag a corner or edge handle to scale. Shift keeps the proportions, Alt scales from the centre.
  • Drag just outside a corner to rotate. Shift turns in steps of 15°.
  • Hold Ctrl and drag the middle handle of an edge to shear. Alt shears around the centre, Shift uses steps of 15°.

You can press or release the keys during the drag. Press Esc during a drag to cancel it.

Aligning and distributing

Open the Align panel with View > Align (Shift+F7).

First choose what to align to in Align To:

  • Selection lines the objects up with the edges or centre of the whole selection. You need at least two objects.
  • Artboard lines them up with the artboard the first selected object is on. One object is enough.

Then click a button in Align Objects: Align Left, Align Center Horizontal, Align Right, Align Top, Align Center Vertical or Align Bottom.

The buttons in Distribute Objects space the objects so their centres are evenly apart:

  • Distribute Horizontally spaces them from left to right.
  • Distribute Vertically spaces them from top to bottom.

With Selection, you need at least three objects, and the two outermost objects stay where they are. With Artboard, two objects are enough, and the outermost objects move to the artboard's edges.

Grouping and stacking

Groups

A group keeps objects together so you can move and transform them as one.

  • Object > Group (Ctrl+G) groups two or more selected objects.
  • Object > Ungroup (Ctrl+Shift+G) breaks up the selected groups.

Stacking order

Objects in the same layer or group are stacked. Objects higher in the stack are drawn in front. Use the Object > Arrange menu:

Command Shortcut
Bring to Front Ctrl+Shift+]
Bring Forward Ctrl+]
Send Backward Ctrl+[
Send to Back Ctrl+Shift+[

With several objects selected, they all move and keep their order among themselves. You can also drag rows in the Layers panel to change the order.

Locking and hiding

  • Object > Lock Selection (Ctrl+2) locks the selected objects so you can't select or change them by accident.
  • Object > Unlock All (Ctrl+Alt+2) unlocks every locked object and selects them.
  • Object > Hide Selection (Ctrl+3) hides the selected objects.
  • Object > Show All (Ctrl+Alt+3) shows every hidden object and selects them.

You can also lock and hide single objects and layers in the Layers panel. See Documents and artboards.

Copying and pasting

Command Shortcut What it does
Edit > Cut Ctrl+X Copies the selection and removes it
Edit > Copy Ctrl+C Copies the selection
Edit > Paste Ctrl+V Pastes slightly down and to the right of the original. Each further paste moves a little more
Edit > Paste in Place Ctrl+Shift+V Pastes at the exact original position, back into the layer it came from
Edit > Paste in Front Ctrl+F Pastes at the original position, directly in front of the selected object
Edit > Paste in Back Ctrl+B Pastes at the original position, directly behind the selected object
Edit > Duplicate Ctrl+Alt+D Copies the selection without using the clipboard. The copies sit just in front of the originals, slightly offset, with "Copy" added to their names
Edit > Delete Delete Removes the selection

Pasting works between documents, too. Paste in Place puts the objects at the same position in the other document.

Pasting from other apps

When you copy in Graphics Editor, other apps receive the selection as SVG. You can also choose Edit > Copy as SVG.

You can paste SVG artwork and pictures from other apps. When an app offers both, Graphics Editor pastes the SVG, so you get editable shapes. A picture becomes an embedded image.

Snapping, grid and guides

Snapping

Snapping pulls the pointer to useful positions when you move objects with the Selection tool and when you draw shapes. Turn each kind on or off in the View > Snap menu or in the Snap Options dialog.

Snap to Pulls the pointer to On at first
Grid The nearest grid point. Works even when the grid is hidden Yes
Guides Guides Yes
Anchor points Anchor points of other objects Yes
Path The outlines of other objects No
Pixel Whole-number positions No

View > Snap > Snap to Grid has the shortcut Ctrl+Shift+'. Your snap settings are remembered between sessions.

Smart Guides

View > Smart Guides (Ctrl+U) snaps the pointer to the edges and centres of other objects, and shows a line where it snaps. Smart Guides are on at first.

Snap Options

View > Snap > Snap Options… shows all five snap settings, with Select All and Select None buttons. Snap Tolerance sets how close the pointer must come before it snaps.

Grid and rulers

  • View > Show Grid (Ctrl+') shows a grid with lines 10 points apart. When you zoom out far, fewer lines are drawn.
  • View > Show Rulers (Ctrl+R) shows or hides the rulers. They use the unit set in Edit > Preferences… > Units.

Guides

Guides are lines that help you place objects. They are not printed or exported.

  • Drag from a ruler onto the canvas and let go where you want the guide: the top ruler makes a horizontal guide, the left ruler a vertical one. A click on a ruler makes nothing.
  • View > Add Horizontal Guide… and View > Add Vertical Guide… add a guide at the position you type.
  • View > Guides > Make Guides turns the selected horizontal or vertical lines and rectangles into guides. A rectangle gives a guide along each of its four edges. The objects are removed.
  • View > Guides > Clear Guides removes all guides.
  • Drag a guide to move it. Click a guide to select it, then press Delete to remove it.
  • View > Show Guides (Ctrl+;) shows or hides the guides.
  • View > Lock Guides (Ctrl+Alt+;) stops guides from being moved, added or removed. Choose View > Unlock Guides to undo this.

Guides are saved with the document, and each document has its own. Adding, moving or removing a guide counts as an unsaved change.

Note: Changes to guides can't be undone with Edit > Undo. If you turn objects into guides by mistake, Undo brings the objects back, but the new guides stay. Remove them by hand or with Clear Guides.