Reference

Panels

Every panel in Graphics Editor: how to open it and what it is for, grouped by the kind of work it helps with.

Working with panels

Panels sit in docks on the right of the window, in three tab groups; a few wide panels (Script Console, Animation Timeline and Variable Data) open along the bottom. At first you see Color and Swatches at the top, Properties, Appearance, Transform and Stroke in the middle, and Layers and Artboards at the bottom.

Open a panel from the menu named below. A tick in the menu shows which panels are open; choosing a panel that is open but hidden behind another tab brings it to the front. Drag a panel by its title bar to move or float it. Window > Reset Workspace puts every panel back where it started.

Most panels act on the current selection and follow the active document tab. Changes made in panels can be undone with Edit > Undo.

Colour and appearance

Color

Open: View > Color Panel.

Sets the fill or stroke colour of the selection. Choose Fill or Stroke, then pick a colour with the RGB, HSB or CMYK sliders or type a hex value such as AABBCC. None removes the fill or stroke, and the swap button exchanges fill and stroke colours.

Swatches

Open: View > Swatches.

A library of saved colours. Click a swatch to apply it to the selection's fill; Shift-click or right-click applies it to the stroke, and double-click edits the swatch. Add, Delete, Apply Fill, Apply Stroke and None work on the current swatch and selection. Load Library… and Save Library… read and write swatch libraries, including Adobe Swatch Exchange (.ase) files.

Color Guide

Open: View > Color Guide.

Suggests colours that go with the selection's fill colour. Choose a harmony Rule (complementary, analogous, triadic, split complementary, tetradic or monochromatic) to see matching colours with their tints and shades. Click a colour to apply it to the selection's fill, or to its stroke when Stroke is turned on.

Gradient

Open: View > Gradient.

Builds a gradient fill. Choose Linear or Radial, add, remove and recolour stops, set each stop's offset, Reverse the stops, and click Apply to fill the selection with the gradient. To drag the gradient on the canvas, use the Gradient tool (see Tools).

Stroke

Open: View > Stroke.

Sets every detail of the selection's stroke: width, cap, join, miter limit, alignment (centre, inside or outside), dashes (preset, pattern and offset) and arrowheads at the start and end with their scale. Add Stroke gives a stroke to selected objects that have none.

Appearance

Open: View > Appearance Panel.

Lists the fills, strokes and effects of the selected object, in the order they are drawn. Add Fill, Add Stroke and Add Effect add new entries; each entry can be shown or hidden, moved up or down, removed, and edited, including its own opacity and blend mode and the settings of each effect. With several objects selected, new entries are added to all of them.

Transparency

Open: View > Transparency (Ctrl+Shift+F10).

Sets the opacity and blend mode of the selection. Isolate Blending on a group keeps its blend modes from affecting the artwork behind the group.

Graphic Styles

Open: View > Graphic Styles.

Saves the complete appearance of an object (fills, strokes and effects) as a named style. New Style captures the selected object, Apply gives the style to the selection, and you can rename and delete styles. Load Library… and Save Library… exchange style libraries (.mgstyles) between documents and computers.

Objects and layout

Properties

Open: View > Properties Panel.

Shows the selected object's name, type, position, size, opacity, fill and stroke, with extra rows for the kind of object: corner radius for rectangles, sides for polygons, points and inner radius for stars, and font size for text. Edit a value to change the object.

Transform

Open: View > Transform Panel.

Shows and edits the selection's position (X, Y), size (W, H) and rotation (R). Rotation turns the whole selection about its centre.

Align

Open: View > Align (Shift+F7).

Lines up the selected objects by their left, right, top or bottom edges or their centres, and spaces them evenly across or down. Align To chooses whether objects align to the selection's bounds or to the artboard.

Pathfinder

Open: View > Pathfinder.

Combines two or more selected shapes: Unite joins them, Subtract cuts the front shape from the back one, Intersect keeps only the overlap and Exclude removes the overlap.

Layers, artboards and symbols

Layers

Open: View > Layers Panel.

Shows the document's layers and the objects in them as a tree. Click the eye and lock columns to hide or lock a layer or object, drag rows to change the stacking order, and double-click a name to rename it. Add Layer adds a new layer; right-click for Lock, Hide, Duplicate and Delete, which act on everything selected in the panel.

Artboards

Open: View > Artboards.

Lists the artboards. Add, Duplicate (with its artwork) and Delete manage them; select one to change its name, width and height or to apply a size preset.

Symbols

Open: View > Symbols Panel.

Reusable artwork. Create Symbol turns the selection into a symbol; Place Instance, or dragging a symbol onto the canvas, adds a copy that follows the symbol. Delete removes a symbol, and Load Library… and Save Library… exchange symbol libraries.

Open: View > Links.

Lists the placed images, whether they are linked or embedded, and any whose file is missing. Relink points an image at another file, Update and Update All reload changed files, Embed stores a linked image in the document, and Go To selects the image on the canvas.

Type

Character

Open: Type > Character Panel.

Sets the font, weight, size, leading, tracking and baseline shift of the selected text.

Paragraph

Open: Type > Paragraph Panel.

Sets the alignment of the selected text (left, centre, right or justified). For area text it also sets the number of columns, the gap between them, the inset and padding, and what happens to text that doesn't fit (clip or ellipsis).

Styles

Open: Type > Character/Paragraph Styles.

Named character and paragraph styles, on two tabs. New creates a style from the selected text, Apply gives it to the selected text objects, Redefine updates a style from the selected text, and Rename… and Delete manage the list. Styles belong to Graphics Editor rather than to one document, so they are available in every document.

Document and history

Open: View > Navigator Panel.

A small picture of the whole document with the current zoom level. Click in it to move the view to that spot.

Undo History

Open: View > Undo History.

Lists the changes you have made, oldest first, starting from the document's initial state. Steps you have undone are greyed out. Click a step to go back to that point; click a greyed step to redo up to it.

Document Info

Open: View > Document Info.

Facts about the document: the number of objects of each type, the artboards, the fonts used and the placed images. Refresh updates the lists.

Comments

Open: Ctrl+Alt+M (Collaboration > Show Comments).

Notes pinned to places on the canvas. Add Comment… adds a pin at the centre of the selection, or of the document when nothing is selected. Select a comment to read it, Reply, Resolve or Reopen it, or Delete it; clicking a pin on the canvas with the Selection tool selects its comment. Comments are saved with the document and never printed or exported. View > Show Comment Pins hides the pins.

Images and 3D

Image Trace

Open: View > Image Trace.

Turns a selected image into vector shapes. Choose a preset (such as Black and White, Line Art, Silhouettes or High Fidelity Photo) or set the mode, threshold, number of colours or grey levels and smoothing yourself, with a preview. Trace adds the shapes above the image and keeps it; Expand replaces the image with the shapes.

Content-Aware

Open: View > Content-Aware….

Three tools for placed images. Content-Aware Fill fills the area under shapes drawn over an image with matching texture. Content-Aware Scale resizes an image while keeping its important parts, optionally protecting the area under a selected shape. Smart Crop suggests crops for an aspect ratio and applies the one you pick.

Ray Trace 3D

Open: View > Ray Trace 3D.

Renders a selected shape as a lit 3D object. Choose a material preset (such as plastic, metal, glass or gold) or set the colour, metallic, roughness, specular and transmission values; add and adjust lights; set the resolution, samples and bounces. Render Preview shows the result, and Add to Selection adds it as an effect on the selected object.

Web, animation and data

Device Preview

Open: View > Device Preview.

Shows the current artboard inside a phone, tablet or desktop frame (iPhone 15, iPhone 15 Pro Max, iPad Pro 11", Samsung Galaxy S24, Pixel 8 or Generic Desktop). Rotate switches between portrait and landscape.

Animation Timeline

Open: View > Animation Timeline.

Adds animation and interaction to objects for animated SVG export. An animation changes position, rotation, scale, opacity, colour or path over time, with a duration, delay, easing and repeat count. An interaction runs an action, such as toggling visibility or opening a URL, on a click, hover or mouse press. Preview plays it, and Export Animated SVG… saves the file.

Variable Data

Open: View > Variable Data….

Turns a design into a template filled from a data file. Load CSV or Load JSON reads the records; Bind to Selection links the selected text or image to a data column. Step through the records to preview them, Apply Record writes one into the document, and Export All saves every record as PNG, JPEG or SVG.

Global Edit

Open: View > Global Edit Panel, or select an object and choose Object > Enter Global Edit (Ctrl+Alt+G).

Edits all objects that match the selected one at the same time, across every artboard. Criteria chooses what counts as a match (appearance, size, shape, fill colour, stroke colour or all of them); the panel shows the reference object and the number of matches. Exit Global Edit ends it.

Proofing

Soft Proofing

Open: View > Proofing > Soft Proofing Options….

Shows on screen how colours will print. Turn on Enable Soft Proofing, choose the proof and document profiles and the rendering intent, and choose whether to simulate the paper colour and black ink.

Scripts and plugins

Script Console

Open: Tools > Script Console (Ctrl+Shift+J).

Runs JavaScript on the current document. Type a script and click Run Script or press Ctrl+Enter; the output appears below it. Each run is one step you can undo. Open… and Save… load and save script files, and Clear empties the output. Automation explains scripting.

Plugin Manager

Open: Tools > Plugin Manager.

Lists the installed plugins with their details. Install Plugin… adds a plugin file, Load, Enable and Disable control it, and Uninstall removes it.